Kit Assembly; Iso Din Radio Provision With Pocket; Iso Ddin Radio Provision - Metra 99-5841B Instrucciones De Instalación

ISO DIN radio provision with pocket

1. Secure the radio brackets to the pocket
using the (4) #8 x 3/8" Phillips screws
provided. (Figure A)
2. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
3. Slide the radio into the bracket/pocket
assembly, then secure it using the
screws supplied with the radio.
(Figure B)
Continue to Axxess
Interface Installation

KIT ASSEMBLY

(Figure A)
(Figure B)

ISO DDIN radio provision

1. Secure the radio brackets to the radio
using the screws supplied with the
radio. (Figure A)
Continue to Axxess
Interface Installation
(Figure A)
REV. 8/31/2020 INST99-5841B
5