Kit Assembly; Iso Din Radio Provision With Pocket; Iso Ddin Radio Provision - Metra 99-5838CH Instrucciones De Instalación

ISO DIN radio provision with pocket

1. Secure the radio brackets to the pocket
using the (4) #8 x 3/8" Phillips truss-head
screws provided with this kit. (Figure A)
2. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
3. Slide the radio into the bracket/pocket
assembly, and then secure it using the
screws supplied with the radio. (Figure B)
Continue to Axxess Interface Installation
8

KIT ASSEMBLY

(Figure A)
(Figure B)

ISO DDIN radio provision

1. Secure the radio brackets to the radio
using the screws supplied with the radio.
(Figure A)
Continue to Axxess Interface Installation
(Figure A)
|
386.257.1187 MetraOnline.com