Iso Din Radio Provision With Pocket; Kit Assembly; Iso Ddin Radio Provision - Metra 99-8231 Instrucciones De Instalación

ISO DIN radio provision with pocket

1. Clip the radio brackets into the
radio trim panel. (Figure A)
2. Secure the pocket to the radio
brackets with (4) #8 x 3/8" Phillips
screws supplied. (Figure B)
3. Remove the metal DIN sleeve and
trim ring from the aftermarket radio.
4. Slide the radio into the completed
assembly, and then secure using
the screws supplied with the radio.
(Figure B)
5. Locate the factory wiring harness
and antenna connector in the dash.
Metra recommends using the
proper mating adapters from Metra
and/or AXXESS.
6. Test the radio for proper operation.
7. Mount the completed assembly into
the dash, and then reassemble the
dash in reverse order of disassembly.

Kit Assembly

(Figure A)
(Figure B)
99-8231

ISO DDIN radio provision

1. Clip the radio brackets into the
radio trim panel. (Figure A)
2. Secure the radio brackets to the
radio using the screws supplied
with the radio. (Figure B)
3. Locate the factory wiring harness
and antenna connector in the dash.
Metra recommends using the
proper mating adapters from Metra
and/or AXXESS.
4. Test the radio for proper operation.
5. Mount the completed assembly
into the dash, and then reassemble
the dash in reverse order of
disassembly.
3
(Figure A)
(Figure B)