Cleaning And Maintenance - Bimar SE1600.EU Folleto De Instrucciones

Fax +32 030 9904733
OPERATION
The heater have two "switches": n.1 to select the heater's power and others switch for LED lighting.
The selection changes each time you pull the cord.
There is also a safety switch that turns off the radiant part if the heater tips over.
ATTENTION: The heater must not be used if the plugs are damaged glass.
Before each use, make sure the device is in good condition and that the electric cord is not damaged
(if in doubt, contact professionally qualified personnel). Before plugging the cord into the socket,
make sure the switch is off. Then proceed as follows:
1) Insert the plug in the current socket
2) Select the switch (8) in the pos. "I" the appliance is on and the switch (7) in the pos. "I" for LED
light.
3) To turn the heater off, push the switches in pos. "0" .
Never leave the appliance connected to the socket if it is not in use, especially for long periods.

CLEANING AND MAINTENANCE

Attention: before cleaning the appliance, switch it off, remove the plug from the current socket and
leave it until getting cool.
• To clean the base, use a slightly damp, soft cloth; do not use scouring pads or abrasive products.
• To clean the radiant part, use a slightly damp, soft cloth; do not use metal scouring pads or abrasive
products, water or other liquids; do not immerse in water or other liquids.
• When not being used, cover it and put it in a dry place; it is a good idea to put it back in its original
packaging to protect it from dust and humidity.
• A special tool is required to replace the electrical resistance (220-240V 1350- 1600W): contact an
authorized service center, also for any repairs.
• Should you decide not to use the appliance any more, we recommend making it inoperative by
cutting the power cord (after making sure you have disconnected the plug from the socket) and
make dangerous parts harmless if children are allowed to play with them, such as the heating
elements.
• If you decide not to use the appliance any more, we recommend making it inoperative by cutting
the power cord (after making sure you have disconnected the plug from the socket) and make
dangerous parts harmless if children are allowed to play with them.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN
ACCORDANCE WITH EC DIRECTIVE 2011/65/EC.
At the end of its working life, the product must not be disposed of as urban waste. It must be taken to
a special local authority differentiated waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative consequences for the
environment and health deriving from inappropriate disposal and enables the constituent materials to
be recovered to obtain significant savings in energy and resources. As a reminder of the need to
dispose of household appliances separately, the product is marked with a crossed-out wheeled
dustbin.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Bimar
(Italy). The pages must be reproduced and folded in
order to obtain a booklet A5 (+/- 148.5 mm width x 210
mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't
change the page numbering. Keep the language
integrity.
10/28
Assembly page 10/28