Publicidad
Idiomas disponibles
Idiomas disponibles
• To delete the selected setting, press the C button.
Activating the weekly schedule (Timer)
•
Press the TIMER ON / OFF button to activate (symbol "
disable the Timer function.
NOTE: When the timer is active, the heating level (1000W or 2000W) must be selected
manually: if the heater function is not selected, only the flame effect will be activated at
the set ignition time.
Automatic heating mode
Press the IC button (11) to activate the automatic heating mode. The AUTO icon (A) will
appear on the display.
When it's activated, the heating level automatically changes according to the set
temperature difference and the ambient temperature difference.
First use
Run the appliance at the maximum power (2000W) as described above, to eliminate the
"new" smell and / or any residual oils that could emit smoke; during or after this operation,
it's advisable to air-out the environment.
Select the desired functions described above.
To turn off the appliance, press the main switch to position "0", and remove the plug from the
power outlet.
For long periods of inactivity, remove the plug from the socket.
The appliance as a device to prevent overheating: if the temperature exceeds a certain value,
it automatically stops operation. Turn off the main switch 0/I, remove the plug from the wall
socket, make sure the air output grille and the heating element are free of dust, lint, or
anything else. Let the appliance cool (for about 15 minutes). Insert the plug in the outlet, turn
on the main switch and select the desired features; if it doesn't start or in case of doubt,
consult a qualified professional.
CLEANING AND MAINTENANCE
Attention: before cleaning the appliance, turn it off, remove the plug from the outlet and wait
for it to cool.
• Periodically check that the air-intake grill is not obstructed by fuzz or threads.
• Use a soft, slightly damp cloth to clean the body and front glass; do not use metal scouring
pads or abrasive products, in particular for cleaning the glass, we recommend only using
specific products for cleaning glass.
• Replacing the power cord requires a special tool: contact an authorized service centre, also
for any repairs.
• The warranty does not cover parts that are defective due to failure to follow the installation,
use or maintenance instructions or shipping damage. Also excluded are the replacement or
" (A) on the display remains lit) or
24/64
Publicidad
