Introduction; Intended Use; Features; Package Contents - Parkside PAMFW 12 A1 Traducción Del Manual De Instrucciones Original

CORDLESS MULTI-PURPOSE
TOOL PAMFW 12 A1

Introduction

Congratulations on the purchase of your new appli-
ance. You have selected a high-quality product.
The operating instructions are part of this product.
They contain important information on safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the specified areas of application. Please also
pass on these operating instructions to any future
owner.

Intended use

The appliance is intended for sawing, cutting and
grinding. The following materials are preferable
for processing: wood, plastic, drywall elements,
light and non-ferrous metals, fasteners (e.g. nails,
screws) and wall tiles. It is particularly suitable
for near-edge and flush work. Any other usage
or modification of the appliance is considered
improper and carries a significant risk of accidents.
Not for commercial use.

Features

Tool release lever
ON/OFF switch
Battery display LED
Release buttons
Battery pack
Dust extraction unit (3 pcs.)
Housing attachment
Speed adjustment wheel
Dust extraction duct
Ventilation slits
LED work light
Tensioning screw
Ring connector
Scraper 52 mm
Diamond saw blade 65 mm
HCS plunge saw blade 32 mm
Sanding plate
│ GB │ IE
■ 14
Charging status display LED
Control LED
High-speed charger
Sanding sheets

Package contents

1 cordless multi-purpose tool PAMFW 12 A1
1 high-speed battery charger PAMFW 12 A1-2
1 battery pack PAMFW 12 A1-1
1 delta sanding plate
6 sanding sheets 80 mm flange
1 scraper 52 mm
1 HCS plunge saw blade 32 mm
1 diamond saw blade 65 mm
1 dust extraction unit (3 pcs.)
1 carrying case
1 set of operating instructions

Technical data

Cordless multi-purpose tool:
PAMFW 12 A1
Rated voltage:
Electronic speed control:
Oscillation angle:
Battery: PAMFW 12 A1-1
Type:
Rated voltage:
Capacity:
High-speed battery charger: PAMFW 12 A1-2
INPUT:
Rated voltage:
Power consumption:
OUTPUT:
Rated voltage:
Charging current:
Charging time:
Fuse (internal):
Protection class:
12 V
(Direct current)
n 5000–19000 rpm
0
3.2°
LITHIUM ION
12 V
(Direct current)
1500 mAh
230 V ~ , 50 Hz
(Alternating current)
32 W
12.6 V
(Direct current)
1.8 A
approx. 60 min.
T3.15A
3.15 A
II /
PAMFW 12 A1