Optional Accessories - Best D49M30SB Manual Del Usuario

Optional Accessories

Accessory
Model ACRD
MODELS
ATSKD30
ATSKD36
ATSKD48
MODELS
MD6T
MD8T
MD10T
MODELS
ATKD30SB
ATKD36SB
ATKD48SB
Description
REMOTE UP/DOWN CONTROL
Use when you cannot reach the UP/
DOWN Button on the downdraft chimney.
Can be located on counter top, face of
cabinetry or on the side cabinet of an
island. Cut-out size: 2 1/4" H x 2" W
Cannot be used where remote control
will interfere with cooking, where hot
pans could be set, or where hot liquids
could be spilled on the control.
(Remote wiring connects with 6-pin
connection)
GAS COOKTOP SEAL KIT
Recommended for use with all gas
cooktops. Includes trim bracket and trim
seal.
30", 36" & 48" widths.
MAKE-UP AIR DAMPER
Use to provide make-up air (when called
for) to keep the home comfortable by
allowing the downdraft to operate at
optimum levels.
Directwire design works with select
BEST downdrafts to balance indoor air
®
pressure by providing interlocked make-
up air; damper opens automatically
when the range hood is activated.
8" & 10" round diameters.
Connects to 2 CONTACTS on
ELECTRICAL PANEL.
MAKE-UP
AIR DAMPER
CONTACTS
RANGE TRIM KIT
Use with free-standing range - where a
gap is present between back of range
and downdraft.
30", 36" & 48" widths.
Optional Accessories
Accessory
MODEL AEWD5
MODEL ANKD
MODEL AFCD
MODEL AVDKD8
MODEL AVDKD10
MODEL AVDKD219
21
Description
EXTENSION CABLE - 5-FT.
Use where electrical panel is remotely
mounted. Extends electrical panel cable
an additional 5-feet.
NON-DUCT RECIRCULATING KIT
Use where ducting is not feasible or
available. Mount to toe kick or base of
a cabinet and attach directly to Model
PF6 Flex Blower using 8" round duct. Kit
can be rotated so that the exhaust is not
directly at your feet. Includes
recirculation filter and decorative
cover plate.
RECIRCULATION FILTER REPLACEMENT
Replacement filter for ANKD Non-Duct
Recirculating Kit. Use to effectively
capture cooking contaminants.
1-7/8" X 19" TO 8" ROUND
TRANSITION
Rectangular to 8" round transition for
left, right, or rear exhaust - using Model
PF6 Flex Blower. Can be attached to
downdraft unit or rectangular duct
(AEDD2). Includes S-clips for easy,
secure attachment.
1-7/8" X 19" TO 10" ROUND
TRANSITION
Rectangular to 10" round transition for
left, right, or rear exhaust - using
external blower. Can be attached to
downdraft unit or rectangular duct
(AEDD2).
RECTANGULAR ADAPTOR FOR
1-7/8" X 19"
Use to connect 1-7/8" x 19" rectangular
duct directly to downdraft when using
side or rear exhaust.