Cabinet Cutouts - Best D49M30SB Manual Del Usuario

Cabinet Cutouts

CAUTION
BEFORE CUTTING HOLE IN CABINET FOR DUCTWORK,
check for interference with floor joists, wall studs,
electrical wiring, or plumbing.
Use the dimensions in illustrations to help plan how and where to
provide duct access through your cabinet. Generally, 1-7/8" x 19"
rectangular duct will be used through left, right, and back of
cabinet - while 8" round duct will be used through cabinet floor.
For left, right, or rear exhaust: Allow at least 18" for transition and
elbow or blower.
For left / right exhaust: a 30" deep cabinet is recommended to
align properly with flex blower. Flex blower can be mounted to rear
cabinet wall or to a platform / frame (not provided) on the base of
the cabinet floor. (See flex blower instructions).
Note: Flex blower can only attach to the front of the downdraft.
Cabinet depths of 24" to 30" are required - depending on the
type of cooking appliance.
If using a Recirculating Kit, see "Plan the installation"
section of the installation instructions packaged with the kit.
Side Ducting Cutout
/ 8 " / 8 "
5 - 7 5 - 7
c m c m
. 9 . 9
( 1 4 ( 1 4
Appliance
Cutout
( 5 .
" "
2 1 2 1
c m c m
. 3 . 3
( 5 3 ( 5 3
4 "
. 2
( 1 0
Rear Ducting Cutout
Appliance
Cutout
10
Planning
) )
2 "
m )
1 c
) )
)
c m
2 1 2 1
( 5 3 ( 5 3
" "
. 3 . 3
c m c m
) )
2 4 2 4
- 3 / - 3 /
( 6 2 ( 6 2
4 " 4 "
. 9 . 9
c m c m
) )
4 "
( 1 0
. 2
c m
)