Replacing The Dustbag - Philips City line HR8376/07 Manual De Instrucciones

C
4 Put the appliance in upright position and attach the lower tube
to the appliance by means of the clip.
The height of the clip can be adjusted by sliding it along the tube.

Replacing the dustbag

The new Philips Sydney+ High Filtration dustbag (type HR6999/90) is
made of a special material that enables the highest measures of
filtering.That offers many profits: cleaner outlet air, less replacing of
filters and less dust in the appliance.The dustbag is more hygienic,
stronger (even when wet), contains 25% more dust than other
dustbags and guarantees that the suction power stays on a higher level,
even when the dustbag is getting fuller.The dustbag is even closable so
that if you replace the dustbag, no dust can escape.
Replace the dustbag as soon as the "dustbag-full indicator" changes
colour (when the nozzle is not placed on the floor).
1 Switch the appliance off..
C
2 Open the cover.
C
3 Push the dustbag holder backwards.
C
4 Remove the full dustbag by pulling the cardboard tag.
When you do this, the dustbag will be automatically sealed.
ENGLISH
7