Replacing The Dustbag - Philips City line reach & clean HR8378/07 Manual De Instrucciones

Replacing the dustbag

Replace the dustbag as soon as the "dustbag-full indicator" changes
colour (when the nozzle is not placed on the floor).
1 Switch the appliance off.
C
2 Open the cover.
C
3 Push the dustbag holder backwards.
C
4 Remove the full dustbag from the holder by pulling the
cardboard tag.
When you do this, the dustbag will be automatically sealed.
C
5 Slide the cardboard front of the new dustbag into the two
grooves of the dustbag holder. Press it down as far as possible.
C
6 Pull the dustbag holder forwards (you will hear a click).
You cannot close the cover if no dustbag has been inserted.
ENGLISH
9