Replacing The Dustbag; Ordering Dustbags - Philips FC8139 Manual De Instrucciones

All manuals and user guides at all-guides.com
replacement

replacing the dustbag

- Replace the dustbag as soon as the dustbag-full indicator has changed
colour permanently, i.e. even when the nozzle is not placed on the
floor.
1 Switch off and unplug the appliance.
2 Pull the cover upwards to open it.
3 Lift the dustbag holder out of the appliance.
Make sure you hold the dustbag upright when you lift it out of the
appliance.
4 Pull at the cardboard tag to remove the full dustbag from the holder.
When you do this, the dustbag is sealed automatically.
,
5 Slide the cardboard front of the new dustbag into the two grooves of
the dustbag holder as far as possible.
6 Put the dustbag holder back into the vacuum cleaner.
Note: If no dustbag has been inserted, you cannot close the cover.
7 Push the cover downwards to close it.
replacing the hEpa exhaust filter
Always unplug the appliance before you replace a filter.
Replace the HEPA exhaust filter every 12 months.
- To remove the old filter and place the new filter, follow the instructions
for removing and placing the filters in section 'Cleaning the HEPA
exhaust filter' in chapter 'Cleaning and maintenance'.

ordering dustbags

- Philips Classic s-bag synthetic dustbags: type number FC8021.
English
13