Tabla de contenido
Publicidad
Press the "Stop" button in order to interrupt the current and
connect the signal to the main track or to the programming
track (page 18). Make sure that the wire bracket (program-
8
ming bracket) surrounded with cardstock is clipped onto
the underside of the decoder. Turn the current back on by
pressing the "Stop" button again.
Changing signal aspects will now blink in the active pro-
gramming mode. Now press the signal image for the color
Select
light signal set up on the Keyboard on the Central Station.
76391: Hp1
With a signal with more than 2 aspects other signal aspects
will alternately blink. The individual steps for these signals
can be found in examples further down on this page.
76394:
HP1 => Sh1
76371: Sh1
76372: Sh1
76393:
HP1 => HP2
Publicidad
Tabla de contenido
