warning
under no circumstances should you try to repair the set yourself as this will
invalidate the warranty.
if a fault occurs, first check the points listed, before taking the set for repair. if you
are unable to solve a problem by following these hints, consult your dealer or service
center.
problem
no power, playback
does not start
Hold indication
and/or no reaction
to controls
no sound or
bad sound quality
pls insert cd
or
no audio file
indication
unfinalized cd
indication
solution
insert the batteries correctly.
replace the batteries.
connect the mains adapter securely.
deactivate hold.
disconnect the set from the power supply
or take out the batteries for a few seconds.
press 2; to resume playback.
adjust the volume.
check and clean the connections.
keep this set away from active mobile phones or
strong magnetic fields.
insert a disc, label upwards.
clean or replace the disc.
wait until the steamed up lens has cleared.
make sure you have inserted an audio disc
or an mp3-cd.
make sure the inserted cdr or cdrw is
finalized.
troubleshooting
23