Charging With The Power Cord; Charging In The Smartclean System - Philips Norelco 7000 Serie Manual De Instrucciones

Charging with the power cord

2

Charging in the SmartClean system

22_002_7341_1_DFU-Luxury_A6_v5.indd 11
Charging takes approx. 1 hour. A fully charged
shaver has a shaving time of up to 50 minutes.
Note: You cannot use the product while it is
charging.
1 Make sure the product is switched off.
2 Put the small plug in the product and
connect the power plug into any 100V to
240V AC outlet. Use only the power cord and
1
SmartClean system provided.
The display on the shaver will indicate the
product is charging.
3 After charging, remove the power plug from
the wall outlet and pull the small plug out
of the product.
Note: An adapter plug may be necessary for
cord usage in some foreign countries. Use
an attachment plug adapter of the proper
configuration for power outlet.
1
Put the small plug in the back of the
SmartClean system.
2 Put the power plug into any 100V to 240V AC
outlet. Use only the power cord provided.
3 Press the top cap to be able to place the
shaver in the holder ('click').
11
English
24/05/17 16:17