Replacing The Cartridge Of The Smartclean System - Philips Norelco 7000 Serie Manual De Instrucciones

Replacing the cartridge of the SmartClean system

1
22_002_7341_1_DFU-Luxury_A6_v5.indd 25
-
Each retaining ring has two recesses that fit
exactly into the projections of the shaving head
holder. Turn the ring clockwise until you hear a
click to indicate that the ring is fixed.
Note: Hold the shaving head holder in your
hand when you reinsert the shaving heads and
1
reattach the retaining rings. Do not place the
shaving head holder on a surface, as this may
cause damage to the shaving heads.
7
Attach the shaving head holder to the bottom
part of the shaving unit ('click').
8 To reset the replacement reminder, press and
hold the on/off button for approx. 7 seconds.
Replace the cleaning cartridge when the
replacement symbol flashes orange or every
3 months.
1 While holding the SmartClean system with
one hand, press the button on the side of the
2
SmartClean system and lift the top part of the
SmartClean system.
2 Remove the cleaning cartridge from the
SmartClean system and pour out any remaining
cleaning fluid.You can safely pour the cleaning
fluid down the sink.
3 Discard the empty cleaning cartridge.
Contact your local town or city officials for
recycling information.
25
English
24/05/17 16:17