Using The Smartclean System - Philips Norelco 7000 Serie Manual De Instrucciones

1
2
22_002_7341_1_DFU-Luxury_A6_v5.indd 21
6 While holding the SmartClean system with
one hand, gently push the top part of the
SmartClean system back down ('click').

Using the SmartClean system

Note: If you use the shaver with shaving foam
or gel, quickly rinse under warm water before
cleaning in the SmartClean system.
Caution: Always shake excess water
off the shaver before you place it in the
SmartClean system.
1
Press the top cap to be able to place the
shaver in the holder ('click').
2 Hold the shaver upside down above the
holder. Make sure the front of the shaver points
towards the SmartClean system holder.
3 Place the shaver in the holder (1), tilt the shaver
backwards (2) and press down the top cap to
connect the shaver ('click') (3).
3
The battery symbol starts to flash, which
indicates that the shaver is charging.
21
English
24/05/17 16:17