Cleaning And Maintenance; Cleaning The Shaver In The Smartclean System - Philips 9000 Serie Manual Del Usuario

Cleaning and maintenance

Cleaning the shaver in the SmartClean system

Note: The accessories supplied may vary for
different products. The box shows the accessories
that have been supplied with your product.
SmartClean system Plus has two phases: the
rinsing phase and the drying phase (Fig. ).
Preparing the SmartClean system for use
Caution: Do not tilt the SmartClean system to
prevent leakage (Fig. ).
Note: Hold the SmartClean system while you
prepare it for use.
Note: If you clean the shaver in the SmartClean
system once a week, the SmartClean cartridge
lasts approximately three months.
1 Put the small plug in the back of the
SmartClean system.
2 Put the supply unit in the wall socket.
3 Press the button on the side of the SmartClean
system (1) and lift the top part of the
SmartClean system (2) (Fig. ).
4 Pull the seal off the cleaning cartridge (Fig. ).
5 Place the cleaning cartridge in the SmartClean
system (Fig. ).
6 While holding the SmartClean system with one
hand, gently push the top part of the
SmartClean system back down ('click') (Fig. ).
Using the SmartClean system
Caution: Always shake excess water off the
shaver before you place it in the SmartClean
system (Fig. ).
1 Press the top cap to be able to place the shaver
in the holder ('click') (Fig. ).
21
English