Replacing The Cartridge Of The Smartclean System - Philips S5000 Serie Manual De Usuario

ENGLISH
22
2
1
Note: If you remove the adapter from the wall socket
during the cleaning program, the program aborts.
Note: 30 minutes after the charging phase has been
completed, the SmartClean system switches off
automatically.
5 To let the shaver dry, you can leave it in the
SmartClean system until your next shave.
You can also remove the shaver from the
SmartClean system, shake off excess water,
open the shaving unit and let the shaver air dry.
Replacing the cartridge of the SmartClean
System
If you clean the shaver in the SmartClean system
once a week, the SmartClean cartridge will last
approximately three months.
Replace the cleaning cartridge when the
replacement symbol flashes orange or when you are
no longer satisfied with the cleaning result. If used
once a week, the SmartClean cartridge will last for
approximately three months
1 Press the button on the side of the SmartClean
system and lift the top part of the SmartClean
system.
2 Take the empty cleaning cartridge from the
SmartClean system and pour any remaining
cleaning fluid out of the cleaning cartridge.
You can simply pour the cleaning fluid down the sink.
3 Throw away the empty cleaning cartridge.
4 Unpack the new cleaning cartridge and pull the
seal off the cartridge.