Menu Option; User Menu; Menu 1; Menu 2. Clock - BOREAL AIRE Serie Instrucciones De Instalación, Uso Y Mantenimiento

Button Description
ON/OFF
EN
4
Unblocking
5
Decreases power
6
Increases power
9.3

MENU OPTION

Pressing button nº 3 of display we access the MENU. It is divided into different sections and levels that allow to access the stove configuration and
programming.
The access to the technical menu of the stove is protected by a password. These parameters should be modified only by an authorised technician. (The
changes in these parameters could cause a wrong running in the stove and the subsequent lost of its warranty).
9.3.1

USER MENU

The following table briefly describes the menu structure in the stove. In the attached table, only the options available to the user are specified.
The 01 menu element is disabled in these models.
9.3.2

MENU 1

Menu 1 has no utility or even the visualization is not operative.
9.3.3

MENU 2. CLOCK

It sets up the time and date. To set the clock up you have to move by the different
submenus and introduce the data, changing values with buttons 1 and 2. The card has
a lithium battery that allows the clock to work during 3/5 years.
9.3.4

MENU 3. PROGRAMME ADJUSTMENT (TIMETABLE SCHEDULE OF THE STOVE)

IMPORTANT NOTE. Before starting the set up of the stove, please check that the time and date shown are correct. Otherwise, the selected
programming would be set up depending on the time and date set by default and this could not satisfy your needs.
The following table briefly describes the programming menu structure in the stove where are detailed all the different options:
Menu
03 - Programme setting
28
Modality Performance description
WORKING It switches on or off the stove pressing 2 seconds.
BLOCKING Unblocks the boiler and switches it off.
MENU / PROGRAMMING Goes back to the previous level menu and saves the modified data.
ON/OFF Decreases the output value of the stove.
MENU Moves to the previous menu option.
PROGRAMMING Goes back to the previous submenu value.
ON/OFF Increases the output value of the stove.
MENU Moves to the following menu option.
PROGRAMMING Moves to the following submenu option.
Menú
01- Reg. aux. fan ** Only ductable stoves
02 - Clock adjustments
01- Day
02- Hour
03- Minute
04- Day
05- Month
06- Year
03 - Programme setting ** See point 10.4.4.
04 - Select Language
01 - Italian
02 - French
03 - English
04 - German
05 - Portuguese
06 - Spanish
05- Stand-by Mode
06 - Sound mode
07 - Initial load
08 - Stove State Provides information of the stove status.
Sub-menu 1.
1- Set up chrono
2- Daily programme
Submenu
Sub-menu 2.
01- Set up chrono
01 - PROG daily
02- Start 1 Day
03- Stop 1 Day
06
MENU 02
MONTH
CLOCK
Value
ON/OFF
ON/OFF
Hour
Hour