Functions Of The Remote Control's Buttons; Button Description; Performance Description; Menu Option - BOREAL RADIOFRECUENCIA Serie Instrucciones De Instalación, Uso Y Mantenimiento

9.3

FUNCTIONS OF THE REMOTE CONTROL'S BUTTONS

Button Description
EN
1
Decrease
2
Increase
ON/OFF
3
Unblocking
4
Select temperature
5
Select power
6
-
7
MENU
9.4

MENU OPTION

By pressing button nº 7 of display we can access to the MENU. It is divided into different sections and levels that allow to access to the stove
configuration and programming.
The access to the technical menu of the stove or insert is protected by a password. These parameters should be modified only by an authorised
technician. (The changes in these parameters could cause a wrong running in the stove and the subsequent lost of its warranty).
9.4.1

USER MENU

The following table briefly describes the menu structure in the stove or insert. In the attached table, only the options available to the user are specified.
9.4.2

MENU 1. AUXILIARY FANS

This menu is only operative for the Slim 12 stoves to which the optional channelling kit has been installed, either one or two
fans where we can control its operation regardless of the working power of the stove. In other words, the operation of the
fans can be configured separately, one can be activated and the other can be deactivated and the operating speed of the
fans can be selected independently.
In order to configure it, just press the key 1 to modify the fan 2 values and the key 3 to do the same with the fan 3. We can
set the following values:
A: automatic speed, that is, the fan speed is proportional to the working power of the stove.
0: Deactivation of the auxiliary fan.
1-5: fan working speed, with 1 being the lowest and 5 the highest.
38
Modality
PROGRAMMING
WORKING
PROGRAMMING
WORKING
WORKING
BLOCKING
MENU / PROGRAMMING
WORKING
WORKING
PROGRAMME
MENU
PROGRAMMING
MENU Sub-menu 1.
01- Reg. aux. fan ** Only visible on Slim 12 model
02 - Clock adjustments
01- Day
02- Hour
03- Minute
04- Day
05- Month
06- Year
03 - Programme setting ** See point 8.4.4.
04 - Select Language
01 - Spanish
02 - Portuguese
03 - Italian
04 - French
05 - English
06 - Catalan
Choose probe
01- Internal probe
02- Cont. probe Rem.
06- Stand-by Mode
07 - Buzzer mode
08 - Initial load
09 - Boiler State Provides information on the status of the stove.

Performance description

It shows several values of the stove in the moment.
Modifies/Increases the value of the selected menu.
It shows several values of the stove in the moment.
Modifies/Increases the value of the selected menu.
It switches on or off the stove during 2 seconds, as appropriate.
Unblocks the boiler and switches it off.
Goes back to the previous level menu and saves the modified data.
Select the temperature option in order to be modified by buttons number 1
and 2.
Select the power option in order to be modified by buttons number 1 and 2.
Button deactivated in this model.
Moves to the following menu option.
Moves to the following submenu option.
MENU 01
VENT-2 1
VENT-3 A
MENU