Menu 4. Select Language; Menu 5. Stand-By Mode; Menu 6. Sound Mode; Menu 7. Initial Load - BOREAL AIRE Serie Instrucciones De Instalación, Uso Y Mantenimiento

- PROGRAMME 1: START 1 and STOP 1
- PROGRAMME 2: START 2 and STOP 2
- PROGRAMME 3: START 3 and STOP 3
- PROGRAMME 4: START 4 and STOP 4
After this, we need to select the activation or deactivation of each programme depending on the day of the wee. For example:
Programme 1: Monday (ON), Tuesday (ON), Wednesday (OFF), Thursday (OFF),
Friday (ON), Saturday (ON), and Sunday (OFF.)
Programme 2: Monday (OFF), Tuesday (OFF), Wednesday (ON), Thursday (OFF),
Friday (OFF), Saturday (ON), and Sunday (ON.)
Programme 3: Monday (OFF), Tuesday (ON), Wednesday (ON), Thursday (ON),
Friday (ON), Saturday (ON), and Sunday (OFF.)
Programme 4: Monday (ON), Tuesday (ON), Wednesday (OFF), Thursday (OFF),
Friday (OFF), Saturday (OFF), and Sunday (ON.)
Thanks to this type of setting we can combine 4 different times throughout the days of the week, but always keeping in mind not to overlay the times.
Sub-menu 03-04- Weekend Programme
In the same way as in the daily programme, this setting up has two independent times
to start and two to stop, with the exception that it only applies to Saturday and Sunday.
To access to these settings we need to start from the following screen.
We need to confirm the access to this programme by pressing button no.3 "SET" and it
should show up the following screen.
We modify the value "OFF" and select "ON": Finally, we introduce the times to start
and stop to complete the desired setting up.
As in the daily programme, if we need to set up only one time to start and stop, the
options START 2 and STOP 2 should indicate "OFF."
It is also possible to schedule one automatic start hour and manual stop hour (or vice
versa).
Example: START 1: 1:08 hours y STOP 00: "off"
START 1: "off" and STOP 1: 22:00 hours.
9.3.5

MENU 4. SELECT LANGUAGE

It allows selecting the languages among those available. To access this menu you
have to confirm with button nº 3 "SET" and then, choose the selected language among
available: Spanish, English, French, Italian, Catalan and Portuguese with buttons nº
1 and 2.
9.3.6

MENU 5. STAND-BY MODE

The stove with the "stand-by mode" activated will turn off when the temperature reaches the temperature set plus a differential (2º C). When the ambient
temperature falls to the set temperature minus a differential (2ºC) the stove automatically
restarts an ignition cycle. It means that if you choose a set temperature of 22ºC the
stove wills turn-off when the room temperature is 24º C and it will restart automatically
when the ambient temperature falls to 20ºC.
In case of the "Stand-by Mode" is deactivated (by default) the stove will work in
"modulation work" when it reaches the set temperature and that allows the temperature
set could be higher.
9.3.7

MENU 6. SOUND MODE

By activating this modality, the stove will emit a sound when the system detects a fault
and goes into the alarm state. To access to this menu you have to confirm with button nº
3 "SET" and then, choose "on" with buttons nº 1 and 2.
9.3.8

MENU 7. INITIAL LOAD

In case of the stove have no more fuel during the operation; to avoid an anomaly in
the next ignition, it is possible to do a fuel pre-load for maximum time of 90 seconds to
load the screw-type conveyor when the stove is switched off and cold. To start the load
press button nº 2 and to stop it press button nº 4.
It is very important that the burner is totally clean when you start the stove.
So, when the initial load is finished, you must check the burner is clean of fuel to do correctly the ignition of the stove.

9.3.9 MENU 8. STOVE STATE

It shows up the current state of the stove and provides information about the devices connected. Therefore, the user can get a technical information. The
next screens are seen automatically.
or
ON
M-3-3-04
MONDAY
PROG-1
M-3-4
PROGRAMME
WEEKEND
OFF
M-3-4-01
PROGRAMME
WEEKEND
MENU
SPA
ON
MENU 05
MODE
STAND-BY
ON
MENU 06
MODE
SOUND
77"
22 ºC
LOAD
INITIAL
EN
31