Menu 4. Select Language; Menu 5. Choose Probe; Menu 6. Stand-By Mode - BOREAL RADIOFRECUENCIA Serie Instrucciones De Instalación, Uso Y Mantenimiento

We need to change option "OFF" with "ON" by pressing buttons no.1 and no.2. This way we
are confirming that the weekly set up has been selected:
Now, we only need to choose the time. we have 4 different times available to start and stop
EN
(see drawings D72 and D73):
- PROGRAMME 1: START 1 and STOP 1
- PROGRAMME 2: START 2 and STOP 2
- PROGRAMME 3: START 3 and STOP 3
- PROGRAMME 4: START 4 and STOP 4
on
M-3-3-04
MONDAY
PROG - 1
MENU
Sub-menu 03-04- Weekend Programme
In the same way as in the daily programme, this setting up has two independent times to start and two to stop, with the
exception that it only applies to Saturday and Sunday. To access to this setting we need to start from the following screen:
off
M-3-4-01
PROGRAMME
WEEKEND
MENU
9.4.5

MENU 4. SELECT LANGUAGE

It allows selecting the languages among those available. To access this menu you have to confirm with button nº 7 and then,
choose the selected language among available: Spanish, Portuguese, Italian, French, English and Catalan with buttons nº 1
and 2.
Menu 05
SELECT
SENSOR
MENU
9.4.7

MENU 6. STAND-BY MODE

The stove with the "stand-by mode" activated will turn off when the temperature reaches the temperature set plus a differential
(2º C). When the ambient temperature falls to the set temperature minus a differential (2ºC) the stove automatically restarts
an ignition cycle. It means that if you choose a set temperature of 22ºC the stove wills turn-off when the room temperature is
24º C and it will restart automatically when the ambient temperature falls to 20ºC.
In case of the "Stand-by Mode" is deactivated (by default) the stove will work in "modulation work" when it reaches the set
temperature and that allows the temperature set could be higher.
42
After this, we need to select the activation or deactivation of each
programme depending on the day of the week. For example:
Programme 1: Monday (ON), Tuesday (ON), Wednesday (OFF), Thursday (OFF), Friday (ON), Saturday (ON), and
Sunday (OFF.)
Programme 2: Monday (OFF), Tuesday (OFF), Wednesday (ON), Thursday (OFF), Friday (OFF), Saturday (ON), and
Sunday (ON.)
Programme 3: Monday (OFF), Tuesday (ON), Wednesday (ON), Thursday (ON), Friday (ON), Saturday (ON), and
Sunday (OFF.)
Programme 4: Monday (ON), Tuesday (ON), Wednesday (OFF), Thursday (OFF), Friday (OFF), Saturday (OFF), and
Sunday (ON.)
Thanks to this type of setting we can combine 4 different times throughout the days of the week, but always keeping in mind
not to overlay the times.
We need to confirm the access to this programme by pressing button no.7 and it should show up
the following screen:
We modify the value "OFF" and select "ON": Finally, we introduce the times to start and stop to
complete the desired setting up.
As in the daily programme, if we need to set up only one time to start and stop, the options START 2 and STOP 2 should
indicate "OFF."
It is also possible to schedule one automatic start hour and manual stop hour (or vice versa).
Example: START 1: 08:00 hours and STOP 1: "off" or
START 1: "off" and STOP 1: 22:00 hours.
9.4.6

MENU 5. CHOOSE PROBE

It allows us to select the probe to control the operation of the stove (the one in the equipment or the one on the remote
control). It is advisable to select the option "Internal probe (stove probe)" so that the stove works depending on the
temperature where it is installed and not the temperature of the room where the remote control is.
18:15
12:00
M-3-3-02
M-3-3-02
STOP
START
PROG - 1
PROG - 1
MENU
MENU
M-3-4
PROGRAMME
WEEKEND
MENU
Menu 04
SPANISH
MENU
ON
Menu 06
MODE
STAND-BY
MENU