Tabla de contenido
Publicidad
Enlaces rápidos
SMF 218
INSTRUCTION MANUAL
Want to watch
a video that
shows how
easy this DIY
project will be?
Watch it now at:
SANUS.com/2688
WE'RE HERE TO HELP
Recommended placement
Check it out at:
SANUS.com/1173
Get it right the
first time.
HeightFinder™
shows you
where to drill.
Call us at:
1-888-333-1376
Our US-based
install experts
are standing
by to help.
Or, chat at:
SANUS.com/chatSS
Publicidad
Tabla de contenido
Manuales relacionados para Sanus SMF218
Resumen de contenidos para Sanus SMF218
- Página 1 first time. install experts shows how HeightFinder™ are standing easy this DIY shows you by to help. project will be? where to drill. Watch it now at: Check it out at: Call us at: Or, chat at: SANUS.com/2688 SANUS.com/1173 1-888-333-1376 SANUS.com/chatSS...
-
Página 2: Important Safety Instructions
● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use. TV Weight Limit If your TV (plus accessories) weighs MORE, this mount is NOT compatible. 60 lbs. (including accessories) (27.2 kg) Visit Simplicity.SANUS.com or call customer DO NOT EXCEED service to find a compatible mount. -
Página 3: Tools Needed
Wall wood studs Solid concrete or CAUTION: concrete block Construction DO NOT install ONLY install on in drywall alone these acceptable wall types. Drywall alone will hold Unsure the weight of your TV. ACCEPTABLE ACCEPTABLE Call Customer Service 1-888-333-1376 Tools Needed 7/16 in. -
Página 4: Wall Plate
Dimensions ([mm] in.) TV INTERFACE 15.7 15.7 WALL PLATE TOP VIEW - EXTENDED SIDE VIEW - EXTENDED 0.42 2X 0.33 10.7 4° 15° DOWN 11.96 303.9 11.12 12.6 282.5 42° - 90° 2.95 75.0 SIDE VIEW - RETRACTED FULLY ASSEMBLED MOUNT TOP VIEW - RETRACTED 11.6 17.3... - Página 5 Supplied Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used.
- Página 6 Parts and Hardware for STEP 2 Hardware for STEP 3 M5 x 6mm Locking Screw (qty. 1) Arm Assembly (qty. 1) Drilling Template (qty. 1) Lag Bolt (qty. 2) 1/4 x 2 ¾ in. For concrete installations ONLY CAUTION Concrete Anchor Do not use in (qty.
- Página 7 STEP 1 Attach TV Bracket to TV 1.2 Select TV Screw Length and Spacers 1.1 Select TV Screw Diameter Only one screw size fits your TV. NO SPACER SPACER NEEDED • Flat Back TV • Flat Back TV • Rounded or with Irregular Back TV Extra Space Needed...
- Página 8 1. 3 Attach TV Brackets to Your TV NO SPACER SPACER NEEDED TYPICAL INSTALLATION ILLUSTRATED. NOTE: If needed, orient the TV brackets so the ends do not protrude beyond the edges of your TV. Center Horizontal TV brackets over your TV's hole pattern and attach using screw combination If your TV included you selected for your TV.
- Página 9 Position the vertical TV support over the horizontal TV brackets Secure the assembly with the four screws and center with your TV.
-
Página 10: Wood Stud Installation
STEP 2A Attach Arm to Wall Wood Stud Installation CAUTION: Avoid potential personal injury or property damage! ● Drywall covering the wall must not exceed 5/8 in. (16 mm) ● Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1½ x 3½ in. (38 x 89 mm) ●... - Página 11 2 ¾ in. (70 mm) 1/8 in. (3 mm) Drill the two pilot holes then remove the drilling template Remove cable cover , then slide the arm cover on arm assembly to expose the mounting holes. IMPORTANT: Be sure to drill into the center of the stud. IMPORTANT: Pilot holes must be drilled to a depth of 2 ¾...
- Página 12 Install the arm assembly using two lag bolts . Tighten the lag Slide the arm cover on arm assembly and snap in place. bolts only until the arm assembly is held tightly in place. CAUTION: Improper use could reduce the holding power of the Go to STEP 3 on PAGE 16.
- Página 13 STEP 2B Attach Arm to Wall Solid Concrete or Concrete Block Installation CAUTION: Avoid potential personal injury or property damage! ● Mount arm assembly directly onto concrete surface (no wall covering) ● Minimum solid concrete thickness: 8 in. (203 mm) ●...
- Página 14 Remove the drilling template and insert two concrete anchors Remove cable cover , then slide the arm cover on arm assembly to expose the mounting holes. CAUTION: Be sure the anchors are seated flush with the concrete surface.
- Página 15 Install the arm assembly using two lag bolts . Tighten the lag Slide the arm cover on arm assembly and snap in place. bolts only until the arm assembly is held tightly in place. CAUTION: Improper use could reduce the holding power of the lag bolt.
- Página 16 STEP 3 Attach TV to Arm Assembly HEAVY! You may need assistance with this step. Swing out the first section of the arm assembly Hang your TV onto the arm assembly by first hooking the top support of vertical TV support , then resting the TV into place.
- Página 17 Lock your TV to the arm assembly with locking screw CAUTION: Avoid potential personal injury or property damage! Screw must be installed to secure the TV to the arm assembly...
- Página 18 Manage Cables Remove the two cable covers NOTE: fully extend arms to ensure enough slack in cables. Route your cables through the arms shown — to avoid pinching. Reattach the cable covers over the cables.
-
Página 19: Tilt Adjustment
TV Adjustments TILT ADJUSTMENT LEVEL ADJUSTMENT Your TV should adjust easily when moved, then stay in place. Turn level screw , to adjust the leveling of your TV. If your TV is too loose or too tight, adjust the side tension knob by hand. - Página 20 EXTEND / RETRACT REMOVING THE TV Your TV should adjust easily when moved, then stay in place. HEAVY! You may need assistance with this step. If your TV is too loose or too tight when moving, adjust bolts using a 3/16 inch hex key (not supplied). CAUTION: Avoid potential personal injury or property damage!
- Página 21 Troubleshooting If you are uncertain about your hardware selection, contact Customer Service at 1-888-333-1376. TV Supplied Spacers TV SUPPLIED SPACERS Use your TV supplied spacer for: Use your TV supplied spacer and spacer for: • Flat Back TV • Rounded or Irregular Back TV with Extra Space Needed •...
-
Página 22: Peso Máximo
● El fabricante no se responsabiliza de ningún daño o lesión resultante del montaje incorrecto o el uso indebido Peso máximo Si su TV (incluidos los accesorios) pesa MÁS, esta montura NO es compatible. 27,2 kg (incluidos los accesorios) Visite vuepoint.sanus.com o llame al número 1-888-333-1376 (60 lbs.) NO EXCEDAS para encontrar una montura compatible. La construcción PRECAUCIÓN: Montantes de madera Hormigón macizo o... - Página 23 herramientas 11 mm (7/16 pulgada) necesarias Cinta Lápiz Nivel Cinta Destornillador Taladro Llave de métrica Adhesiva eléctrico vaso 10 mm 3 mm Localizador (3/8'') (1/8 pulgadas) Hormigón Madera Martillo montantes Punzón Broca Broca Dimensiones VER PÁGINA 4 Piezas y accesorios suministrados VER PÁGINAS 5-6 ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia.
-
Página 24: Sin Espaciador
ESPAÑOL 1,2 Seleccione la longitud de los tornillos para el televisor VER PÁGINA 7 SIN ESPACIADOR CON ESPACIADOR • Televisor con dorso plano • Televisor con dorso plano • Televisores con dorso plano o irregular con necesidad de espacio adicional [Los soportes del televisor se apoyan de [Los soportes del televisor... - Página 25 ESPAÑOL PASO 2A Fijar la placa mural para montantes de madera VER PÁGINA 10 PRECAUCIÓN: Evite lesiones personales y daños materiales. ● El yeso que recubre la pared no debe exceder los 16 mm (5/8'') ● Tamaño mínimo del montante de madera: común 51 mm x 102 mm (2'' x 4'') nominal 38 mm x 89 mm (1 ½'' x 3 ½'') ●...
- Página 26 ESPAÑOL Nivele la plantilla de placa mural y fíjela con cinta adhesiva en el lugar. Realice los orificios guía en el hormigón sólido. Nunca perfore el cemento que une los bloques. IMPORTANTE: Los orificios guía deben realizarse con una mecha de 10 mm (3/8'') de diámetro hasta una profundidad de 76 mm (3''). Retire la plantilla de placa mural e introduzca los anclajes para cemento PRECAUCIÓN:...
-
Página 27: Organizar Los Cables
ESPAÑOL Organizar los cables VER PÁGINA 18 1. Retire la cubierta de los cables NOTA: Extienda el brazo por completo antes de pasar los cables. 2. Pase los cables por el brazo 3. Vuelva a colocar la cubierta de los cables por sobre los cables. - Página 28 SANUS will not be liable for any damages whatsoever arising out of the use or inability to use its products, even if SANUS has been advised of the possibility of such damages. To the maximum extent permitted by applicable law, SANUS disclaims any responsibility for incidental or consequential damages (such as the cost of repairing or replacing other property which damaged when the device does not work properly).