Mounting Bracket - LEGRAND neat PIR II Manual De Usuario

4.3.2 Horizontal detection area
Picture 7. Approximate horizontal detection area.
4.4

Mounting bracket

The mounting bracket is normally used when PIR II
is used as a Door alarm to place the unit on a door
blade, see „6 IDA (Intelligent Door Alarm)".
Picture 8. Mounting bracket.
The screws must be 3.5- 3.7 mm wide and at least 30
mm long and the head must not exceed 2 mm in height.
10
+45°
- 45°
1 m 2 m 3 m 4 m
PIR II User manual - NE41 19003-00 v1.2
5 m 6 m 7 m