LEGRAND neat PIR II Manual De Usuario página 14

6.2 Bypass
When the personnel leaves the room after a visit they
have to push the ON-button (S6). The unit is then
inactive during a period of time to let the person
open/close the door (default is 15 seconds) without
triggering an alarm.
6.3 Configuration
DIP Setting
1
2
3
4
5
6
7
8
Table 4. DIP-settings for IDA.
7 Pairing
To pair a PIR II with a radio unit, e.g. a NOVO, start
pairing in NOVO and activate PIR II by pressing the
Function button S1.
8 Inactivity alarm
The inactivity alarm is not enabled by default and re-
quires computer configuration with the PIR Program-
mer, see PIR II Technical Handbook - NE41 19005-02.
14
OFF (Configuration with DIP-switches).
N/A
ON (IDA function is activated).
ON or OFF, see "13.4 DIP4 - IDA, exit alarm delay".
N/A
ON (Alarms are visually indicated).
ON (Movement detection is visually indicated).
ON or OFF, see "13.8 DIP8 - Disable OFF button (S5)/Alarm
delay".
PIR II User manual - NE41 19003-00 v1.2