On/Off Buttons; Function Switch - LEGRAND neat PIR II Manual De Usuario

4.2.1

On/Off buttons

The On/Off buttons are located on the top of the unit.
Picture 3. PIR II ON/OFF buttons.
The batteries must be removed in order to completely
turn off the unit.
4.2.2 REED switches
The REED switches (S2 and S3) are magnetic swit-
ches that make it possible to use the PIR II as a DOOR
alarm together with the accompanying door magnet,
see „6 IDA (Intelligent Door Alarm)".
There are two small lines on each side of the PIR II
cover to indicate where the REED switches are loca-
ted.
Picture 4. Side view of PIR II.
4.2.3

Function switch

The function switch (S1) is used for pairing with other
radio units, e.g. a NOVO. See „7 Pairing".
PIR II User manual - NE41 19003-00 v1.2
ON
OFF
7