Charging The Battery - Philips Respironics SimplyGo Mini Manual De Instrucciones

SimplyGo Mini User Manual

Charging the Battery

Important: The first time you charge the battery, be sure to charge it fully� Do
not use the DC power cord to do so; instead use AC power�
Note: The battery will begin charging whenever you connect the device to an
AC outlet, regardless of whether or not you are operating the device�
To charge the battery using the AC Power Cord provided with your system,
follow these steps�
1� Connect the AC Power Supply's output cable to the SimplyGo Mini
power input connector�
2� Connect the AC Power Cord's connector into the AC power supply�
3� Connect the AC Power Cord's plug into an AC outlet installed to meet
national or regional electrical code�
Note: The AC Power Supply is equipped with a green light, which illuminates
as soon as you connect the device to an energized AC power source�
4� When charging is complete (this takes four hours or less for the
standard battery), disconnect the AC Power Supply and store it with
the AC Power Cord for future use�
Note: Replacement and spare batteries are available separately� For
information, contact your equipment provider�
Note: An optional SimplyGo Mini Smart Battery Charger (sold separately)
is available for your system� For more information, contact your
equipment provider�
16
1
2