Philips Respironics SimplyGo Mini Manual De Instrucciones página 21

SimplyGo Mini User Manual
To set up the SimplyGo Mini device, follow these steps�
1� Connect a nasal cannula to the patient cannula connector on the
device, as shown� Ensure that the cannula is routed to prevent it from
being pinched or kinked to avoid a disruption of oxygen flow�
Note: Note: A standard single lumen nasal cannula and tubing (not supplied)
should be used to deliver oxygen from the SimplyGo Mini device�
The device works with smooth bore cannula tubing up to 25 ft� (7�6
m); however, use of shorter cannula lengths deliver higher pulse
performance� See Specifications section under "Flow Settings and Pulse
Volumes" for additional details. The proper placement and positioning
of the nasal cannula in the nose is critical to the consistent operation of
the SimplyGo Mini�
2� Power on the device as described in
the next section�
3� Position the nasal cannula on your
face, as shown below, and breathe
normally through your nose�
18