Televes RSD - 7296 Instrucciones De Uso página 65

User Manual User Manual
DiSEqC USALS
This Menú automatically orientates a dish towards a satellite by simply
knowing the orbital position of the satellite and the exact position (longi-
tude/latitude) of where you are.
Use the or buttons to choose the different options.
- Satellite name. We should define the satellites that we are going to
use. To do so, use the
- Specify the transponder that you will use to check the received signal
level by using the
- Angle. Indicate the angle that corresponds to the satellite's orbital
position in degrees. Indicate if this is towards the East or towards the
West with the or
- Longitude. Indicate the exact longitude of where you are in degrees.
Indicate if this is towards the East or towards the West using the
buttons.
- Latitude. Indicate the exact latitude of where you are in degrees.
Indicate if this is towards the North or towards the South with the
or buttons.
Press the OK button to move the antenna to the satellite position.
A bar will appear that indicates the signal level that is available in the
transponder.
or buttons.
or buttons.
buttons .
or
65
"RSD - 7296" "RSD - 7296"