Installing The Camera - Ezviz Bullet Manual Del Usuario

Installing the Camera

Make sure the wall is strong enough to withstand three times
the weight of the camera and the mounting.
If the wall is cement, you need to insert expansion screws
before you install the camera.
If the wall is wooden, you can use self-tapping screw to secure
the camera.
The camera can be installed on the wall or ceiling. Installing on the
wall will be taken as the example in the following content.
1
Sticking Mounting Template
Stick the mounting template to the place to install the camera
and drill the screw holes according to the mouting template.
2
Installing the Camera
Route the camera cables through the mounting base and wire
the cables through the side opening.
Fix the mounting base to the wall with the supplied screws.
Side Opening
5