Dive in SCUBA mode (OC)
This manual does NOT replace adequate training!
The diagram below shows the information shown during a dive with scuba equipment:
20
0
OC
5
:25
.
m
NDL
36
:
%O2
m/min
MAX
21
2.1
37.4
9
0
OC
30
:15
.
m
T TS
STOP
TIME
4
3
3
:
:
:
%O2
MAX
21
37.4
40
English
m WARNING!
{
Principal information
Current depth (at left): Expressed in meters or feet.
Run time (at right): Dive time in minutes: seconds.
Dive mode (at upper right): OC = Open Circuit.
{
If within limits:
NDL: (No Decompression Limit) Time in minutes it's possible to stay at
the current level without exceeding the no decompression limits and make
mandatory deco stops necessary. As a general rule of thumb, it's always
a good idea to remain within the no-decompression limits.
{
If you exceed the limits:
TTS: (Left) Time-to-surface. Total ascent time.
STOP: (Center) Depth of the next mandatory stop.
TIME: (Right) Minutes relative to the next safety stop.