Iso Din Radio Provision With Pocket - Metra 99-7877 Instrucciones De Instalación

ISO DIN radio provision with pocket

1. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the radio for proper operation
2. Mount the ISO brackets to the
radio with the screws supplied
with the radio. (Figure A)
3. Slide the radio into the radio
opening until the side clips engage.
(Figure B)
4. Snap the trim plate into the
radio housing. (Figure B)
5. Snap the pocket into the radio
housing. (Figure C)
6. Re-assemble dash in reverse order
of disassembly.
Kit Assembly
(Figure A)
99-7877
(Figure B)
5
(Figure C)