Din Radio Provision With Pocket - Metra 99-7877 Instrucciones De Instalación

DIN radio provision with pocket

1. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the radio for proper operation.
2. Slide the DIN cage into the radio
housing and secure by bending the
metal locking tabs down.
(Figure A)
3. Slide the aftermarket radio into the
cage and secure. (Figure B)
4. Snap the pocket into the radio
housing. (Figure C)
5. Re-assemble dash in reverse order
of disassembly.
Kit Assembly
(Figure A)
99-7877
(Figure B)
4
(Figure C)