Operation - Abus TVAC80010B Manual Del Usuario

7. Operation

To operate the device, proceed as follows:
Please note:
The device begins recording as soon as the batteries are inserted.
Select motion-
triggered recording /
time-lapse recording
Switching on the
device / opening the
menu
Setting the date and
time
Menu guidance
Stopping recording
Playing back
recordings
Please note:
After exiting the menu, the LCD screen switches off after 10 seconds.
If no buttons are pressed in live picture after switching on, the monitor switches off again after 20
seconds.
Please note:
To go to the menu, the LED must not light up red.
First select the required mode by ensuring the switch in the battery compartment
is in the correct position.
Left (PIR ON): Motion-triggered recording
Right (PIR OFF): Time-lapse recording
Press the power button for three seconds and then release. You will receive the
live picture. Press the Menu/Set button to open the menu.
Set the time when starting the device for the first time:
Press the menu button to open the submenu.
You can change the digits using the arrow buttons.
Use the Power/OK button to move to the next entry.
Once the setting has been successfully made, return to the main menu with the
Menu/Set button.
Use the ▼▲ buttons to navigate between the menu items.
Press the Menu/Set button again to change the settings.
You can change the values using the arrow buttons and press the Power/OK
button to save the setting.
Return to the main menu with the Menu/Set button.
After exiting the menu the settings are displayed again, the screen then switches
itself off, the camera returns to normal operating mode and records again.
Press the Power/OK button for 5 seconds to stop a recording.
In the time-lapse mode, you receive the following message: "Complete Power
Off". The camera is now switched off.
In the motion-triggered recording mode, you receive the following message:
"Complete power off. Please turn off PIR switch".
Set the switch (6) to time-lapse function to switch off the device completely.
Now the device is turned off and you can remove the batteries and micro SD
card.
To watch the recordings, remove the micro SD card and use a suitable card
reader to play back on the PC.
A TIME-LAPSE folder is created for recordings in the time-lapse mode and a
folder named "DCIM saved on the micro SD card" for motion-triggered
recordings.
10
English