6. Installing the camera
Use a screwdriver to open the
battery compartment.
Close up the battery compartment
again using the screwdriver.
Do this by turning the cap
clockwise.
Insert a micro SD card (max. 32
GB, not included). Press the right
switch to select between time-
lapse and motion detection
recording (please see device
description, no. 6).
Put the hinge sleeve on the hinge
screw.
To attach the camera to a wall or
ceiling, first use the mount as a
drill template. Drill the holes and
use the wall plugs and screws
supplied to attach the mount.
8
Insert four 1.5 V AA batteries.
Make sure the polarity is correct.
Now screw both parts together
with the fastening nut.
Then screw the mount onto the
fixing plate.
English