WARNING
Keep unauthorised persons away from the working area (Fig. 8).
Fig. 8
1500
2000
ATTENTION
Before performing any service operations on the hydraulic system, position the
machine in the resting mode (Fig. 5) with the turntable arm lowered and the
turntable completely closed.
TYRE CHANGER DESCRIPTION
The tyre changer operates electro-hydraulically. It works on any type of integral wheels
(drop centre and with a side rim) with the maximum dimensions and weights indicated
in the TECHNICAL DATA paragraph.
The machine is solidly constructed and has relatively reduced dimensions in
comparison to its operative capacity. It holds the wheel in a vertical position and
is activated by the operator, who uses a special mobile control.
- E
- Operator's manual
59
nGlISH