Guide To The Correct Use Of The Machine; Tyre Demounting - Mondolfo Ferro AQUILA RAPTOR Manual De Uso

a
To prevent any rim damage, the plastic insert
under the head (fig. 13) must be replaced every
2 months or sooner, if excessively worn. A spare
insert is supplied with the machine.
i
nformation
Any noise heard when the tool head engages with
the tyre is normal. The noise is caused by the
mechanical return of the tool and not because
the tool has hit the rim. Even if the tool does
touch the rim as the tyre is engaged, this will
not damage the rim in any way. The pressure
applied is very low. If you wish to prevent this
noise, simply press the bead breaker disc harder
against the bead when picking it up.
WARNING
Bead breaking is well known to be a dangerous
operation. It must be carried out in accordance
with the instructions below.
Wheel for cars, off-road and light commercial
vehicles.
58
dviCe
13
GUIDE TO THE
CORRECT USE OF THE
MACHINE
WARNING
Read the "PRACTICAL HINTS, ADVICE AND USEFUL
INFORMATION" section above with great care.

TYRE DEMOUNTING

WARNING
BEFORE STARTING THE DEMOUNTING OPERA-
TION, MAKE SURE THE MACHINE IS SET WITH
THE COLUMN TILTED FROM THE REAR AND
THE DUAL-POSITION BEAD BREAKER SUPPORT
IS NOT LOCKED.
1 • Wheel loading (fig. 14-14a)
- Place the wheel on the lifter OPTIONAL AC-
CESSORY SUPPLIED ON REQUEST
- Lift the wheel operating on pedal 29 OPTIONAL
ACCESSORY SUPPLIED ON REQUEST
- E
14
- Operator's manual
nglIsh