FujiFilm MK18-55mmT2.9 El Manual Del Propietario página 14

Lens Features
These lenses are for movies.
E
MK18-55mmT2.9/MK50-135mmT2.9
These fully manual lenses E-mounts have no electronic contacts. There is no exchange of data be-
tween the camera and lens.
X MKX18-55mmT2.9/MKX50-135mmT2.9
These fully manual lenses X-mounts are equipped with electronic contacts. Data can be exchanged
between the camera and lens.
Q
The lens may not perform as expected and some features may not be available with older versions
of the camera fi rmware. Be sure to update the camera fi rmware to the latest version. Instructions on
viewing the camera fi rmware version and updating camera fi rmware are available from the following
website:
http://www.fujifilm.com/support/digital_cameras/software/#firmware
If you do not have access to a computer, support is available from the local distributor listed in the
"FUJIFILM Worldwide Network" material provided with your camera.
Supplied Accessories
E MK18-55mmT2.9/MK50-135mmT2.9
• Front lens cap (Part No. BU00006892-1**)
• Rear lens cap (Part No. BB00038220-1**)
• Lens hood (MK18-55mm: Part No. BU00007497-1**/MK50-135mm: Part No. BU00007584-1**)
• Lens hood cap (Part No. 057B00742627*)
• Wrapping cloth (Part No. FZ00010454-1**)
• Zoom lever (Part No. 047B00160740*)
• Support foot ×1 (25.5 mm/M3, for support rod attachment, Part No. BB00038388-1**)
• Extension foot ×2 (17.95 mm, for support rod attachment, Part No. BB00035717-1**)
X MKX18-55mmT2.9/MKX50-135mmT2.9
• Front lens cap (Part No. BU00006892-1**)
• Rear lens cap (Part No. BB00036846-1**)
• Lens hood (MKX18-55mm: Part No. BU00007497-1**/MKX50-135mm: Part No. BU00007584-1**)
• Lens hood cap (Part No. 057B00742627*)
• Wrapping cloth (Part No. FZ00010454-1**)
• Zoom lever (Part No. 047B00160740*)
• Support foot ×1 (18 mm/M5, for support rod attachment, Part No. BB00041810-10*)
• Tripod collar foot (Part No. BF00019594-1**)
Q
The part numbers in parentheses are required when ordering spares or replacements.
EN-4
ENGLISH