Noise / Vibration Information - Würth DIGA WO-1/21 Traducción Del Manual De Instrucciones De Servicio Original

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 72
Claims under warranty can only be accepted if
the device is returned fully assembled to a Würth
agency, your Würth sales representative or an
authorised Würth customer service workshop.
Subject to technical changes without prior notice.
We accept no liability for printing errors.

Noise / vibration information

Noise value according to EN12549 and
vibration values (Triax vector sums)
according to EN28927-13:
LPA (Emissions-
sound pressure level)*
LWA (sound power level)*
K (Uncertainty in the speci-
fied sound level)
Operating method: Fixation of fasten-
ers, main grip
Vibration emission value*
a
h
Measurement uncertainty K
Values may vary: The working environment, the
workpiece support, the workpiece, the pressing
force, etc. influence the noise formation at the place
of use and the effects of vibration on the object. The
vibration emission value specified in this information
sheet was measured in accordance with a standar-
dised test detailed in EN28927-13:2019 and can
be used for a comparison between two devices.
It can be used for a provisional assessment of the
exposure.
dB(A)
95
dB(A)
100
dB(A)
3
m/s²
5.5
m/s²
1.0
Warning
The specified vibration emission value
relates to the main application of the
device. If, however, the device
is used for other applications with other accessories
or is used despite being poorly maintained, the
vibration emission may vary. This could significantly
increase the exposure level over the overall opera-
ting period.
An estimation of the vibration strength should also
take into account how often the device is switched
off or over what period of time it is running but not
really in use. This could significantly decrease the
exposure level over the overall operating period.
Additional safety precautions for the protection of
the operating person against the effects of vibration
must be taken into consideration, e.g. maintenance
of the device and the equipment, keeping warm of
the hands, organisation of the workflow.
37

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Diga wo-1/340864 920864 93

Tabla de contenido