11.1.l - Battery charger configuration
(Fig. 33)
WARNING:
The machine comes pre-configured for
use with "Sonnenschein" gel batteries.
-
Lift the seat (A).
Standard configuration with Sonnen-
schein gel batteries
-
Lift the cover (B) and check that the
switches (1 - 2 - 3 - 4) are set to the con-
figuration shown in the diagram (C).
Perform the following operations to modify
the configuration:
Configuration for gel batteries other than
the Sonnenschein typology
-
Lift the cover (B) and check that the
switches (1 - 2 - 3 - 4) are set to the con-
figuration shown in the diagram (D).
Configuration for acid batteries
-
Lift the cover (B) and check that the
switches (1 - 2 - 3 - 4) are set to the con-
figuration shown in the diagram (E).
WARNING:
Only modify switches (1 - 2 - 3 - 4); do not
alter the positions of switches (5 - 6 - 7 -
8).
C
D
B
��
� � � � � � � �
E
EN - 31
EN
A
Fig. 33