Kohler K-11660 Guía De Instalación Y Cuidado página 4

Assemble the Drain (cont.)
Hand tighten the coupling nuts. Do not wrench tighten at this
time.
Apply thread sealant to the threaded end of the tailpiece. Thread
the tailpiece into the tee.
Insert the tailpiece approximately 1" (25 mm) to 2" (51 mm) into
the trap inlet (not shown). If necessary, cut the tailpiece to its
proper length and install the tailpiece into the trap inlet.
Tighten all drain connections.
1114757-2-B 4 Kohler Co.