General Characteristics; Operating Positions - Cembre HT131-C Manual De Uso Y Mantenimiento

Application range
Crimping force
Rated operating pressure
Dimensions
Weight (without dies)
Recommended oil
Advancing speed
Safety
2. INSTRUCTIONS FOR USE (Ref. to figs. 1 and 2)

2.1) Operating positions

The three operating positions are identified on the main handle, which
rotates relative to the reference symbol,
3

1. GENERAL CHARACTERISTICS

Suitable for compression of electrical connectors on conduc-
kN (sh ton)
bar (psi)
with handles closed 473 x 144 mm (18.6 x 5.7 in.)
mm (inches)
with handles open 473 x 344 mm (18.6 x 13.5 in.)
kg (lbs)
The tool has a twin speed operation and automatically
switches from a rapid advancing speed of the ram to a slower
The tool is provided with a max pressure valve; MPC1 special
manometer, is available as an optional accessory to check the
(see Fig. 1).
Rest position (Handles locked): lock handles togethe when tool is
not in use.
Release position: close the moveable handle (10) against the main
handle (1), in order to discharge the oil pressure and retract the
dies.
Operating position: operate the moveable handle (10), to build up
pressure and close the dies.
tors up to 400 mm (800 MCM)
2
130 kN (14.6 sh ton)
700 bar (10,000 psi)
5,5 kg (12.1 lbs)
ENI ARNICA ISO 22
more powerful crimping speed
proper setting of the valve.