Maintenance; Replacing The Battery - Chauvin Arnoux C.A 801 Manual De Instrucciones

6. MAINTENANCE

For maintenance, only use the spare parts. The manufac-
turer will not be held responsible for any accident occurring
following a repair done other than by its after-sales ser-
vice or approved repairers
6.1.

Replacing the battery

For your own safety, never open the adapter until you
have disconnected from all sources of electricity.
Remove the two screws on the back of the instrument
and then remove the bottom half of the housing.
Replace the dead battery with a new 9 V battery (6F22 or
6LF22 type) and slide the battery correctly into its plastic
protective cover.
Reassemble the bottom half of the housing and tighten
the two screws on the back of the housing.
6.2. Storage
If the adapter is not used for a period of more than 60 days,
remove the battery and store it separately.
6.3. Cleaning
The instrument must be disconnected from all sources
of electricity.
To clean the housing, use a cloth dampened with soapy water.
Wipe off with a damp cloth. Then dry rapidly with a cloth or
blown air.
6.4. Calibration
Like all measuring or testing devices, the instrument must
be checked regularly.
This instrument should be checked at least once a year. For
checking and calibration, contact one of our accredited
metrology laboratories (information and contact details
available on request), at our Chauvin Arnoux subsidiary or
the branch in your country.
6.5. Maintenance
For all repairs before or after expiry of warranty, please return
the device to your distributor.
13