Honeywell OM30 Manual De Instrucciones
Ocultar thumbs
Ver también para OM30:
- Guia de instalacion (15 páginas) ,
- Guia de instalacion (10 páginas)
Manuales relacionados para Honeywell OM30
Resumen de contenidos para Honeywell OM30
- Página 1 OmniClass Reader Installation Guide Date: June 21, 2005 Document 7-901036 © 2005 Honeywell International Revision 00...
-
Página 2: Ordering Information
Printed in the United States of America. Honeywell International reserves the right to change any information in this document at any time without prior notice. - Página 3 Switch Parede / Mainel Interruptor magnetico Commutateur Wand / Mittelpfosten magnetique Parete / Montante Interruptor magnetico Mounting Plate Platina Plaque de montage Magnet- schalter Interruttore Suporte de montagem magnetico Montegeplatte Piastra di montaggio © 2005 Honeywell International. Part Number 7-901036-00...
- Página 4 (Excepto en OM30). Un aimant interne indique les intrusions lorsqu'il est utilise avec un commutateur peigne magnetique connecte a un systeme d'alarme externe. (Sauf OM30). Um ima interno proporciona a capacidade de indicacao de violacao quando utilizado com um interruptor de lamina magnetico conectado a um sistema de alarme externo.
- Página 5 OmniClass Reader Installation Guide ASSEMBLY AND DISASSEMBLY MONTAJE Y DESMONTAJE MONTAGE ET DEMONTAGE MONTAGEM E DESMONTAGEM ZUSAMMENBAU UND ZERLEGUNG MONTAGGIO E SMONTAGGIO OM30 / OM40 / OM45 OM55 © 2005 Honeywell International. Part Number 7-901036-00...
- Página 6 OM40 1.63" 2.99" 4.14 cm 7.59 cm 2.44" 6.20 cm 3.75" 1.60" 2.04" 2.99" 2.00" 9.53 cm 4.06 cm 7.59 cm 5.18 cm 5.08 cm .156" .156" .40 cm .40 cm OM30 OM45 © 2005 Honeywell International Part Number 7-901036-00...
- Página 7 OmniClass Reader Installation Guide PREPARING PREPARACION PREPARATION PREPARACAO VORBEREITUNG PREPARAZIONE OM55 © 2005 Honeywell International. Part Number 7-901036-00...
- Página 8 **O fio do dreno pode ser a linha de **Le branchement supplementaire "retorno de dados" quando usada peut servir de ligne de retour de uma fonte de energia separada donnees en cas d'utilisation d'une alimentation electrique separee © 2005 Honeywell International Part Number 7-901036-00...
- Página 9 *scheda attiva (OM55) violett *karte vorhanden *connessioni opzionali (OM55) **Il cavo puo fare da "ritorno dati" se *optionale Verbindungen viene utilizatto un alimentatore **Drainanschluss kann bei Verwen- separato dung separater Stromzufuhr Datenruckleitung sein © 2005 Honeywell International. Part Number 7-901036-00...
- Página 10 TESTING PRUEBA TEST TESTE TESTEN TESTARE Test card Turn power on Pruebe la tarjeta Encienda la unidad Testez la carte Mettez sous tension Placa de teste Ligar energia Kartentest Strom einschalten Test Accendere © 2005 Honeywell International Part Number 7-901036-00...
-
Página 11: Optional Features
* Bloqueio de entrada de sinal - quando ativada, esta linha impede a utilizacao do cartao lido, ou desativa o cartao lido, ate o momento em que for liberado, de acordo com a configuracao. © 2005 Honeywell International. Part Number 7-901036-00... -
Página 12: Optionale Funktionen
* Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. * The Reader is intended to be powered from a limited power source output of a previously certified power supply. © 2005 Honeywell International Part Number 7-901036-00... -
Página 13: Componentes
65 mA avg, 225 mA 80 mA avg, 260 mA peak at 12 VDC peak at 12 VDC Tamper magnet Tamper Output Actual operating distance will vary depending upon installation environment and proximity to metal © 2005 Honeywell International. Part Number 7-901036-00... -
Página 14: Fiche Technique
80 mA avg, 260 mA 72 mA avg, 244 mA Current peak at 12 VDC peak at 12 VDC Tamper magnet Tamper Output Actual operating distance will vary depending upon installation environment and proximity to metal © 2005 Honeywell International Part Number 7-901036-00... - Página 15 65 mA avg, 225 mA 80 mA avg, 260 mA peak at 12 VDC peak at 12 VDC Tamper Output Tamper magnet Actual operating distance will vary depending upon installation environment and proximity to metal © 2005 Honeywell International. Part Number 7-901036-00...
-
Página 16: Technische Daten
80 mA avg, 260 mA 72 mA avg, 244 mA Current peak at 12 VDC peak at 12 VDC Tamper magnet Tamper Output Actual operating distance will vary depending upon installation environment and proximity to metal © 2005 Honeywell International Part Number 7-901036-00... - Página 17 OmniClass Reader Installation Guide © 2005 Honeywell International. Part Number 7-901036-00...
- Página 18 Honeywell Access Systems NexWatch – Europe Specifications subject to change without notice. © Honeywell International. All rights reserved. 135 West Forest Hill Avenue, Boblingerstrasse 17, 71101 Document 7-901036 Schonaich, Germany Oak Creek, WI 53154 Revision 00 Ph (414) 766-1700 Ph +49 7031637784...