Optionale Funktionen; Funzioni Opzionali - Honeywell OM30 Manual De Instrucciones

OmniClass Reader Installation Guide
6
*
OmniClass
*
*
*

OPTIONALE FUNKTIONEN

* Konfigurationsoptionen - LED, Lautsprecher und anderes konfigurieren.
..
Nahere Informationen unter Auftragsleitfaden oder OmniClass
Anwendungshinweis.
* Halteeingang - wenn aktiviert, puffert diese Leitung entweder eine Karte
oder deaktiviert eine Kartenlesung bis zur Freigabe, je nach
Konfiguration.

FUNZIONI OPZIONALI

* Opzioni di configurazione - per configurare il LED, lo speaker e altre
funzioni. Per dettagli, vedere la guida alle ordinazioni o la nota applicativa
OmniClass.
* Ingresso trattenuta - quando viene attivata, questa linea mette in buffer
una scheda o diabilita una scheda, secondo la configurazione.
FCC Warning
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference that may cause undesired operation.
* For proper regulatory compliance, the drain wire should be disconnected at the power
supply end of the cable.
* Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
* The Reader is intended to be powered from a limited power source output of a
previously certified power supply.
© 2005 Honeywell International
OmniClass
10
OmniClass
Part Number 7-901036-00