Display Brightness; Power Management; Hints And Tips - AEG IAE84881IB Manual De Instrucciones

To leave the Menu, touch
of the display, outside of the pop-up window.
To navigate through the Menu, use or .

6.19 Display Brightness

You can change the brightness of the
display.
There are 4 brightness levels, 1 is the lowest
and 4 is the highest.
1. Touch on the display to open the
Menu.
2. Select Settings > Setup > Display
Brightness from the list.
3. Choose the appropriate level.
To leave the Menu, touch
of the display, outside of the pop-up window.
To navigate through the Menu, use or .

6.20 Power Management

If multiple zones are active and the
consumed power exceeds the limitation of
the power supply, this function divides the
available power between all cooking zones.
The hob controls heat settings to protect the
fuses of the house installation.

7. HINTS AND TIPS

WARNING!
Refer to Safety chapters.
7.1 Cookware
For induction cooking zones a
strong electro-magnetic field
creates the heat in the cookware
very quickly.
Use the induction cooking zones with
suitable cookware.
• The bottom of the cookware must be as
thick and flat as possible.
• Ensure pan bases are clean and dry
before placing on the hob surface.
• In order to avoid scratches, do not slide or
rub the pot across the ceramic glass.
Cookware material
20 ENGLISH
• Cooking zones are grouped according to
or the right side
• The maximum heat setting is visible on
• If a higher heat setting is not available
Refer to the illustration for possible
combinations in which power can be
distributed among the cooking zones.
or the right side
• correct: cast iron, steel, enamelled steel,
• not correct: aluminium, copper, brass,
Cookware is suitable for an induction hob
if:
• water boils very quickly on a zone set to
• a magnet pulls on to the bottom of the
Cookware dimensions
• Induction cooking zones adapt to the
• The cooking zone efficiency is related to
the location and number of the phases in
the hob. Each phase has a maximum
electricity loading of 3680 W. If the hob
reaches the limit of maximum available
power within one phase, the power of the
cooking zones will be automatically
reduced.
the slider. Only the digits in white are
active.
reduce it for the other cooking zones first.
stainless steel, multi-layer bottom (with a
correct marking from a manufacturer).
glass, ceramic, porcelain.
the highest heat setting.
cookware.
dimension of the bottom of the cookware
automatically.
the diameter of the cookware. The
cookware with a diameter smaller than the
minimum receives only a part of the
power generated by the cooking zone.