VIDEOPORTERO DIGITAL -
FUNCIONAMIENTO DEL SISTEMA DIGITAL CON TECLADO
OPERATION OF THE DIGITAL SYSTEM WITH KEYPAD
REALIZAR UNA LLAMADA A UNA VIVIENDA - MAKING A CALL TO A FLAT -
Nota:
To make a call to a dwelling, key in its code on the keypad of the entrance panel. The number of digits which must be keyed in
will depend on the value which has been configured in the entrance panel (Position 8 from the configuration menu, pages 27, 28
and 29). As the code is keyed in, it will appear in the display of the panel. Press the
Note: If an error occurs while entering the code, press the
29)
:
REALIZAR UNA LLAMADA A LA CONSERJERÍA -
To make call to conciergerie, press the
ACTIVACIÓN DE ABREPUERTAS DESDE LA PLACA DE CALLE
ACTIVATING THE ELECTRIC LOCK FROM THE ENTRANCE PANEL
Nota:
Press the key
. Then enter one of the door-opening codes previously configured (Positions 14, 15, 16 and 17 from the
configuration menu, pages 27, 28 and 29).
Note: If an error is made while entering the door-opening code, press the key
again. If the code is correct, the electric lock will be activated for the period of time which has been configured; at the same time,
the green led on the entrance panel will light up. If the code is not correct, the panel will emit an error tone while the red led on
the panel will light up .
. 9
:
,
Call made to dwelling with code 12
key on the keypad of the entrance panel and press the
,
14, 15, 16,
17
.
.
key and enter the code again.
.
(
.
-
Dwelling with code 12
/
12
, then press the key
,
.27, 28
,
,
key.
.
8
-
.
.
.
12
key.
,
and enter the code
29)
-
,
.
.
,
.27, 28