Tabla de contenido
Publicidad
VIDEOPORTERO DIGITAL -
PASOS DE CONFIGURACIÓN - STEP-BY-STEP CONFIGURATION -
Nota:
Nota:
Press the
keys simultaneously. When you release the keys, the panel will emit a confirmation sound.
Enter the MASTER key.
If this is the first time that you have accessed the configuration menu, enter the code 12345 (Default MASTER code). If it is not the first time,
enter the MASTER key which you have previously configured. The panel will emit a beep. The display will show the text
to position 1 of the menu.
If the code is incorrect, the panel will emit a beep indicating that an error has been made and the red led will flash. Begin again at step 1.
Note: The maximum time allowed between step 1 and step 2 is 30 seconds. Once this period has elaspsed, you must begin again at step 1.
Adapt the values of the different positions to the type of installation. See "Configuration of the Entrance Panel according the installation",
page 26.
To change the setting, press the
the
keys. In positions 14, 15, 16, 17 and 19, key in the desired code. Press the
Note: If 30 seconds elapse without any key being pressed, you will automatically exit from the configuration menu.
MASTER
1
.
.
:
.
:
30
PASOS CONFIGURACIÓN - STEP-BY-STEP CONFIGURATION -
Maximum time limit
.
key. The information shown in the display will begin to blink
,
.
,
,
1
1
.
MASTER code
MASTER
I
ncorrect code
,
20 - 30
.
.
,
How to adapt the value of the positions
ositions 14,15,16,17, 19
. Select the desired value
key to confirm the setting
12345.
,
.
. 25
.
3.1
P
before going
with
.
.
Publicidad
Tabla de contenido
