Installing And Adjustment Instructions - Alcad PDK-42400 Manual Del Usuario

VIDEOPORTERO DIGITAL -
INSTRUCCIONES DE INSTALACIÓN Y AJUSTE

INSTALLING AND ADJUSTMENT INSTRUCTIONS

If you wish to fix the entrance panel to a
wall, it is necessary to have previously i
nstalled a means of attachment (i. e. a
flush-mounted box or surface wall-mounted
box). See the appropriate data sheets.
. .
Remove the protecting plugs and the
fixing pins from the flush-mounted box.
Choose the two fixing pins you want to
hinge the panel on to, so that it opens
either to the right or to the left or
downwards.
.
Make the electrical connections. See
diagrams and "Connection instructions",
page 18 to 21.
.
,
,
.
.18 21
Once the flush-mounted box has been
put in place, remove the reinforcement.
Place the rings of the panel over the
extracted fixing pins. The unused pins
should be placed in their slots.
.
Configure the entrance panel. See
"Entrance panel configuration
instructions", page 24.
.
.
.24
.