Use Additional Wireless Sensors - ADE WS 2132 Instrucciones De Operación

Suitable locations are, for example, under an
awning or in a carport.

Use additional wireless sensors

The base station is supplied with a wireless sensor.
However, you can operate it with up to three outdoor
sensors. Please contact service@ade-germany.de for
more information or a paid order.
‚ The outdoor sensors can be situated in different
spaces or outdoors.
‚ Every sensor must be allocated its own number
(= no. of the transmission channel).
‚ The standard sensor included in the scope of
delivery always has channel number 1. This
number is fixed and cannot be changed.
Procedure:
1. Place the base station and the new outdoor
sensors close together.
2. Remove the battery compartment cover on the
back of the outdoor sensors.
3. Use the switches to set a separate channel for each
new outdoor sensor. Since the sensor included in
the scope of delivery uses channel 1 by default,
select channel 2 for the second sensor and channel
3 for the third one.
4. Insert two batteries of the battery type indicated
on the bottom. Observe the correct polarity (+/-).
5. Replace the battery compartment covers.
Weather station with ventilation recommendation WS 2132 59